Want to get more free samples of Cisco CCNP Route exam questions and answers? Click Here: Free Sample: Cisco CCNP ROUTE Chapter 1 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 3 Exam Questions and Answers If you want to pass the CCNP exam for the first time, get SPOTO 100% real exam dumps now!1.Which EIGRP algorithm tracks all the routes that are advertised by neighbors and uses the composite metric of each route to compare the routes? A.SPF B.Dijkstra C.STP D.DUAL Right Answers: D 2.If an EIGRP route goes down and a feasible successor is not found in the topology table, how does DUAL flag the route that has failed? A.passive B.active C.successor D.unreachable E.down F.recomputed Right Answers: B Note: If you want to get 100% latest and real Cisco CCNP exam dumps, please contact SPOTO to buy now.3.Refer to the exhibit. What is the advertised distance of the feasible successor to network 192.168.1.0? A.41026560 B.2172416 C.3014400 D.28160 Right Answers:B 4.Which statement is a requirement for the EIGRP AS number? A.It is assigned by IANA and must be the same on each router in the EIGRP domain. B.It is the EIGRP router ID and must be the same on each router in the EIGRP domain. C.It is only locally significant, and as a result it can be different on each router in the EIGRP domain. D.It is selected by the network administrator and must be the same on each router in the EIGRP domain. Right Answers:D 5.What should be done to examine EIGRP adjacency information including uptime and hold time? A.View the EIGRP database. B.View the EIGRP topology table. C.View the IP routing table. D.View the EIGRP neighbor status. Right Answers:D Note: If you want to get 100% latest and real Cisco CCNP exam dumps, please contact SPOTO to buy now. 6.Which two solutions are used in an EIGRP network to reduce DUAL computations? (Choose two.) A.load balancing B.authentication C.partial updates D.summarization E.EIGRP stub routing Right Answers:DE 7.When does an EIGRP router place a route in the active state? A.when an update packet containing information about the route is not acknowledged B.when there is no successor route in the routing table C.when the current successor is no longer valid and there is no feasible successor in the topology table D.when the feasible distance is greater than the reported distance of the route Right Answers:C 8.If replies are not received from all outstanding queries, how long will an EIGRP router wait before placing a route into the SIA state? A.3 seconds B.120 seconds C.180 seconds D.60 seconds Right Answers:C Note: If you want to get 100% latest and real Cisco CCNP exam dumps, please contact SPOTO to buy now. 9.Which EIGRP feature limits Query message scope in a network to improve network stability and reducing resource utilization? A.Named configuration B.Query suppression C.Route summarization D.Stub routing Right Answers:D 10.Which EIGRP stub options would be used on a router to advertise only directly connected networks that are enabled for EIGRP? A.static B.receiveonly C.summary D.connected Right Answers:D 11.Which type of EIGRP packet is sent when the active time is only half way through to help overcome any SIA issue? A.SIAQuery B.SIAReply C.Query D.Reply Right Answers:A Note: If you want to get 100% latest and real Cisco CCNP exam dumps, please contact SPOTO to buy now. 12.When implementing EIGRP unequal cost load balancing using the variance command, which two conditions must be met? (Choose two.) A.The route must be reachable. B.The metric of the route must be lower than the metric of the successor, multiplied by the value of the variance. C.The metric of the route must be equal to or lower than the metric of the successor, multiplied by the value of the variance. D.The route must be loop free, by meeting the feasibility Correct! condition. Right Answers:BD 13.Router R1’s GigabitEthernet 0/0 is configured with the IPv6 address 2001:DB8:CAFE:1::1/64. Which of the following would enable EIGRP for IPv6, with an AS of 1, on this interface? A.R1(config)# ipv6 router eigrp 1 R1(configrtr)# network 2001:db8:cafe:1::/64 B.R1(config)# interface g0/0 R1(configif)# enable ipv6 eigrp 1 C.R1(config)# ipv6 router eigrp 1 R1(configrtr)# enable 2001:db8:cafe:1::/64 D.R1(config)# interface g0/0 R1(configif)# ipv6 eigrp 1* Right Answers:D 14.Which statement is not correct regarding named EIGRP configuration? A.IPv4 address family router ID uses a 32 bit value B.IPv4 interfaces are enabled automatically for EIGRP C.IPv6 interfaces are enabled automatically for EIGRP D.IPv6 address family router ID uses a 32 bit value Right Answers:B 15.Which of the following statements are correct regarding named EIGRP configuration? (Choose three.) A.EIGRP for IPv4 messages are sent over IPv4 and EIGRP for IPv6 messages are sent over IPv6* B.Uses the address family feature for configuration C.EIGRP for IPv4 and EIGRP for IPv6 messages are sent over IPv6 D.A virtualinstance name is used when configuring named EIGRP configuration in global Correct! configuration mode E.An AS number is used when configuring named EIGRP configuration in global configuration mode Right Answers:ABD Note: If you want to get 100% latest and real Cisco CCNP exam dumps, please contact SPOTO to buy now. Read more: How do I self-study CCNA & CCNP? CCNP ENCOR 350-401 Official Cert Guide PDF How to Buy CCNP Data Center 350-601 Dumps? How to pass the CCNP Enterprise 350-401 exam with dumps? Where Can I Get CCNP Security Certification Study Guides? Is it worth doing CCNP in 2020?

Technology advances would be enabling new collaboration applications as well as businesses that would be connect everything devices, people, machines, and applications. With intent-based networking, collaboration teams could take advantage of automation for scaling their infrastructure. But to capitalize on these opportunities, today’s collaboration professionals require a broader range of skills and a more in-depth focus in strategic technology areas.   Cisco has designed the CCNP Collaboration certification to help you prove your skills in the ever-changing scenario of collaboration technologies. The certification would be covering core technologies and a collaboration focus area of your choice. You would be able to choose where you wish to focus. You would be able to decide where you want to take your career.  Among the industry’s most widely respected and recognized certifications, CCNP would set you apart. It would be telling the world you know what you would be doing. Additionally, completing any CCNP certification exam would be able to earn you a Cisco Specialist certification so that you would be gaining the acknowledgment for your accomplishments along the way. For the fastest way to prepare & pass the 350-801 exam, you would choose SPOTO 100% real 350-801 dumps for a single success! Exams and recommended training For earning the CCNP Collaboration, you would be required to pass two exams: a core exam as well as a collaboration concentration exam of your choice. Every exam in the CCNP Collaboration program would be able to earn you an individual Specialist certification.  The core exam would be focusing on your knowledge of collaboration infrastructure. The core exam is also considered to be the qualifying exam for CCIE Collaboration certification. Clearing this exam would be able to help the candidates towards earning both of these certifications. Concentration exams would be focusing on emerging as well as industry-specific topics. You could prepare for concentration exams by taking their corresponding training courses offered by Cisco.  Hurry to Quiz 350-801 Certification Exam Samples The Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) v1.0 course is considered to be quite helpful for the candidates to prepare for your advancing-level roles, which would be focused on implementation as well as operation of Cisco collaboration solutions. You would be able to gain the skills and knowledge required to deploy and implement core collaboration and networking technologies, which would be including design and infrastructure, protocols, codecs, and endpoints, Cisco IOS (Internetwork Operating System) XE gateway as well as media resources, Quality of Service (QoS), call control, and additional Cisco collaboration applications. Benefits of Obtaining Cisco 350-801 Certification: You would be able to show the world your knowledge about stuff with a high-value certification. You would be able to customize your certification to your technical focus. You would be able to able to position yourself for advancement in the fast-paced world of collaboration technologies. You would be able to add collaboration automation skills to the areas of your expertise. You would be able to earn a Specialist certification for clearing any CCNP exam - core or concentration. You would be able to qualify for the CCIE Collaboration exam by making the CCNP core exam. You would be able to link that CCNP certification badge to all your social media profiles. Check out Network Engineer CCNP Salary – Average Salary How to Pass the 350-801 exam easily? Suppose you desire to pass the Cisco 350-801Certification exams and look for the most reliable and clear to understand the material so, now it would be quite easy for you if you have gained the SPOTO Cisco 350-801 Dumps. Why SPOTO? We would be presenting you with the most up-to-date questions and answers of Cisco 350-801 Certification exams, which would be entirely accurate according to the updated exam. So, obtain the SPOTO Cisco 350-801 Dumps and achieve your dream certification. Over 17 years, we have helped thousands of candidates to pass their IT exams in the first try!  Latest Passing feedback   Join SPOTO to be the next CCNP Collaboration holder! Read more: CCNP ENCOR 350-401 Official Cert Guide PDF CCIE News-Highlights of the 6th Cisco Webinar on CCIE Collaboration Lab Exam Hurry to Quiz 350-801 Certification Exam Samples How do I self-study CCNA & CCNP?

Want to get more free samples of Cisco CCNP Route exam questions and answers? Click Here: Free Sample: Cisco CCNP ROUTE Chapter 2 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 3 Exam Questions and Answerscisco ccnp route exam cost 1.Which two major areas can be used when discussing the highlevel overview of a typical enterprise network? (Choose two) A.Building distribution B.Building access C.Campus backbone D.Enterprise edge E.Enterprise campus Right Answers：DC 2.Which of the following is used when choosing a dynamic routing protocol? A.Knowledge level of a specific routing protocol B.Scalability C.Type of links supported D.Cost of equipment E.Vendor support Right Answers：AB Note: If you want to get 100% real and valid Cisco CCNP exam dumps, you can contact SPOTO to buy latest ones. 3.BGP is which type of protocol? A.Advanced distance vector B.Linkstate C.Path vector D.Distance vector Right Answers：C 4.Which two factors can influence convergence time for a routing protocol? (Choose two.) A.Fine tuning routing protocol timers B.Type of link between routers C.Configuring route summarization D.Size of the routing table Right Answers：AC 5.Scalability of a network includes which two factors? (Choose two.) A.Number of routers B.Ability to do auto summarization C.Number of adjacent neighbors D.Distance between routers Right Answers：AC Note: If you want to get 100% real and valid Cisco CCNP exam dumps, you can contact SPOTO to buy latest ones. 6.Which of the following traffic types is not supported by IPv6? A.Broadcast B.Multicast C.Anycast D.Unicast Right Answers：A 7.What is the IPv6 multicast address used by EIGRP? A.FF02::6 B.FF02::5 C.FF02::9 D.FF02::A Right Answers：D 8.Which type of IPv6 address is used by routing protocols for communications only on the link? A.Linklocal B.Site local C.Unique local D.Multicast Right Answers：A 9.Which type of ICMPv6 message is sent by a device to request information about the network such as the prefix, prefix length and default gateway? A.Router Advertisement B.Router Solicitation C.Neighbor Solicitation D.Neighbor Advertisement Right Answers：B Note: If you want to get 100% real and valid Cisco CCNP exam dumps, you can contact SPOTO to buy latest ones. 10.Which type of ICMPv6 message is sent by a device to inform another device of its IPv6 address and associated Ethernet address? A.Neighbor Solicitation B.Router Advertisement C.Router Solicitation D.Neighbor Advertisement Right Answers：D 11.Which type of network allows access to multiple devices on the same network but does not provide broadcast capabilities? A.Multiaccess B.NBMA C.Broadcast D.Pointtopoint Right Answers：B 12.Which type of subinterface provides connections similar to physical pointtopoint links and has no neighbor discovery issues? A.Multipoint B.Pointtomultipoint C.All of the above D.Pointtopoint Right Answers：D 13.Which tunneling protocol was developed by Cisco to encapsulate a Layer 3 protocol inside a pointtopoint, tunneloverIP network? A.MPLS B.DMVPN C.IPsec D.GRE Right Answers: D Note: If you want to get 100% real and valid Cisco CCNP exam dumps, you can contact SPOTO to buy latest ones. 14.A Layer 3 MPLS VPN over GRE is an example of what type of VPN? A.DMVPN B.Hybrid VPN C.MultiVPN D.Combination VPN Right Answers: B 15.What is the main benefit of a GRE tunnel in respect to routing protocols? A.Supports IP multicast B.Stateless C.Strong security D.Low overhead Right Answers: A 16.What protocol is used by routers to determine the nexthop IP address in tunneling networks? A.MPLS B.Dynamic GRE C.NHRP D.Mgre Right Answers: C 17.What framework of open standards that provides confidentiality, data integrity, authentication and antireplay protection? A.VPN B.PSK C.IPsec D.PAP Right Answers: C 18.R1 has an adjacent RIPng neighbor R2. R1 has a LAN with no neighbors, 2001:DB8:ACAD:1::/64. R1 advertises this prefix to adjacent RIPng neighbor, R2. What metric does R2 display for 2001:DB8:ACAD:1::/64? A.2 hops B.1 hop C.4 hops D.3 hops Right Answers: A 19.How is an interface enabled for RIPng? A.Interfaces are automatically enabled for RIPng when the RIPng process is started B.Using the router ripng name interface command C.Using the ipv6 router rip name interface command D.Using the network prefix/prefixlength router mode command Right Answers: C 20.Router R1 has multiple routes in its routing table including RIPng routes, directly connected networks and a static default route. R2 receives a static default route from R1 but no other routers. This is because R1 uses which option at the end of ipv6 rip name default information interface command? A.defaultonly B.static C.only D.originate Right Answers: C