Both the entry level certifications have their own importance in the field of IT Industry, and also it is quite difficult to gain both of them, unless you have a good training institute, like the SPOTO. Let’s compare both of this certification to understand its importance much better. Categories Exam Code 100% Pass Dumps CCNP Enterprise 350-401 ENCOR 300-410 ENARSI 300-415 ENSDWI 300-420 ENSLD 300-425 ENWLSD 300-430 ENWLSI 300-435 ENAUTO I. Cisco Certified Networking Professional Data Center CCNA Certification: The CCNP Data Center certification would be exclusively focused on roles that would be particularly deal with data center designing, installing, and maintaining. The CCNP Data Center certification is also considered to be an advanced-level certification that would carry the CCNA Data Center certification as a prerequisite. In addition to of holding the CCNA Data Center certification, it is also recommended that learners should have about 2 to 4 years of data center experience, along with having trained for CCNA Routing and Switching, ideally would having to be earned the certification before beginning with CCNP Data Center. The CCNP Data Center certification is presently undergoing some revisions with v5.0 CCNA Cisco certified network exams which would be retiring on July 23, 2017. CCNP Data Center v5.0 certification is going to require successful completion of four exams, but learners could choose from the two pathways so as to reflect specializations for the final two exams. All learners are required to clear the below mentioned two examinations: • Cisco CCNP Data Center 642-999 DCUCI • Cisco CCNP Data Center 642-997 DCUFI II. Career Considerations After CCNP Data Center Payscale provides a helpful salary guide in order to help the learners for determining appropriate pay scales for job  roles opportunities which would be associated with certification. Payscale would report, a range of salaries for the employees which would hold any CCNP certification, between $46,041 and $152,930. Roles those are common for those who are holding the CCNP Data Center certification which includes systems administrator, network administrator, network operations analyst, network technician, data center analyst, data center designer, data center administrator, data center helpdesk engineer, and much more. III. The CCNP – Routing and Switching The stands for Cisco Certified Network Professional – Routing and Switching is considered as an intermediate-level certification that would be validating the learners’ expertise and experience in networking with Cisco products. The CCNP R&S is extraordinarily popular certifications among the learners and highly sought after by the IT industry. This certification level would be providing a lasting foundation for both virtual and physical networks in environments of the enterprise. The CCNP R&S Exam is made up of three exams, they are mentioned below: • 300-101 ROUTE • 300-115 SWITCH • 300-135 TSHOOT IV. Career Considerations Payscale provides a helpful salary guide in order to help the learners in order to determine appropriate pay scales for job opportunities which would be associated with the CCNP R&S. It would be depending on professional level experience, an employee who would be holding any CCNP Cisco certified network professional certifications offer that could be earned between $46,564 and $153,571 annually. Roles those are common for the candidates holding a CCNP R&S include senior network support engineer, network engineer, network administrator, IT manager, and network architect. V. Conclusion Nearly all the organizations which would be dependent on effective data center management. So in order to develop the data center knowledge and skills would be equipped the candidates to advance their career now and in the future as the industry that would continue to evolve. Taking into consideration your career to the next level which would be certified and specialization that would be creating exciting opportunities! The CCNP R&S is a highly desirable certification that would be setting IT professionals apart as they place their foot into the IT Sector in order to enter into more advanced stages of their careers. Gaining the CCNP R&S opens doors and creates opportunities for learners in order to continue advancing their careers and take on exciting new professional certification challenges. If you wish to clear any of Cisco Certification, you should gain it by joining the SPOTO training institute.

Want to get more free samples of Cisco CCNP Route exam questions and answers?  Click Here: Free Sample: Cisco CCNP ROUTE Chapter 1 Exam Questions and Answers , Free Sample: Cisco CCNP ROUTE Chapter 2 Exam Questions and Answers  and Free Sample: Cisco CCNP ROUTE Chapter 3 Exam Questions and Answers   1.Route redistribution has been configured from an OSPFv3 domain into an EIGRP for IPv6 domain. However, the OSPFv3 directly connected routes are not being redistributed into EIGRP for IPv6. Which option would successfully resolve this isue? Get more about ccie eigrp click here. A.The EIGRP redistribute command command requires the static keyword. B.The EIGRP redistribute command command requires the include-connected keyword. C.The EIGRP redistribute command command requires the connected keyword. D.There are no directly connected OSPFv3 interfaces. Right answers: B 2.What two methods can be used to filter routes? A.route maps with ACLs or prefix lists B.Cisco NetFlow C.default routes D.distribute lists with with ACLs or prefix list E.IP SLA Right answers: AD Note: If you want to pass Cisco CCNP exam dumps at the first try. Contact SPOTO to get 100% real and valid CCNP dumps. 3.Which two routing protocol redistribution statements are true? (Choose two.) A.Redistribution is always performed inbound. B.Redistribution is performed inbound and outbound. C.The routing table on the router doing the redistribution does not change. D.Redistribution is always performed outbound. E.The routing table on the router doing the redistribution changes. Right answers: CD 4.When configuring a seed metric for redistributed routes, what is the recommended metric setting? A.Set the seed metric to a value matching the largest metric within the autonomous system. B.Set the seed metric to a value greater than the largest metric within the autonomous system. C.Set the seed metric to a value less than the largest metric within the autonomous system D.Do not set a seed metric. Right answers: B 5.Which ip prefix-list command would only permit the aggregate address 192.168.0.0/16 to be advertised when applied using the distribute-list prefix FILTER-ROUTES out router configuration command on R1? A.R1 (config)#ip prefix-list FILTER-ROUTES permit 192.168.0.0/16 ge 16 B.R1 (config)#ip prefix-list FILTER-ROUTES permit 192.168.0.0/16 eq 16 C.R1 (config)#ip prefix-list FILTER-ROUTES permit 192.168.0.0/16 D.R1 (config)#ip prefix-list FILTER-ROUTES permit 1921 68.0.0 / 0 le 16 Right answers: C 6.Which ip prefix-list line will be used when multiple lines match a given prefix? A.line with the largest sequence number B.line with the lowest sequence number C.line with the longest prefix mask length D.all matching lines Right answers: C Note: If you want to pass Cisco CCNP exam dumps at the first try. Contact SPOTO to get 100% real and valid CCNP dumps. 7.Which routing feature is implemented to exchange routing information between autonomous systems? A.route redistribution B.floating static routes C.routing policy D.route summarization E.default route Right answers: A 8.Which is the default seed metric for an OSPF route that is redistributed into an EIGRP autonomous system? A.20 B.110 C.infinity D.1 E.90 F.170 Right answers: C 9.What is the final step when configuring a route map for redistribution? A.Apply match commands. B.Define access lists. C.Apply policy to an interface using ip poicy route-map interface configuration command. D.Apply policy to a routing process using the redistribute router configuration command. Right answers: D 10.Which two redistribution techniques are least likely to introduce routing loops into a network? (Choose two.) A.multipoint one-way redistribution B.one-point two-way redistribution C.one-point multi-way redistribution D.one-point one-way redistribution E.multipoint multi-way redistribution F.multipoint two-way redistribution Right answers: BD Note: If you want to pass Cisco CCNP exam dumps at the first try. Contact SPOTO to get 100% real and valid CCNP dumps. 11.Refer to the exhibit. After configuring two-way redistribution, an administrator notices that none of the EIGRP routes are being advertised in the OSPF network. What is a possible reason that the routes are not being advertised? A.The wrong EIGRP AS is being redistributed B.The metric value is wrong for the redistribute command under OSPF C.The metric value is wrong for the redistribute command under EIGRP D.The subnets keyword is missing on the redistribute command under OSPF Right answers: A 12.Refer to the exhibit. The EIGRP subnets such as 10.10.0.0/16 and 10.20.0.0/16 are not being seen inside the OSPF domain. What is a possible reason for this? A.The network statement for EIGRP is missing the network mask configuration B.A seed metric for EIGRP has not been set. C.The redistribute command is missing the subnets keyword in the OSPF configuration D.The metric configuration for OSPF is set too high. Right answers: C 13.What is the administrative distance of an external OSPF route that was learned from EIGRP through redistribution? A.10 B.20 C.170 D.90 E.110 Right answers: E

Want to get more free samples of Cisco CCNP Route exam questions and answers? Click Here: Free Sample: Cisco CCNP ROUTE Chapter 1 Exam Questions and Answers , Free Sample: Cisco CCNP ROUTE Chapter 2 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 3 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 4 Exam Questions and Answers 1.Which three statements regarding the Cisco IOS IP SLA feature are true? (Choose three.) A.Cisco IOS IP SLA only works with distance vector protocols B.Cisco IOS IP SLA can be used to filter routing updates to and from neighbors C.Cisco IOS IP SLA sends simulated data D.Cisco IOS IP SLA can be used to mark packets with different ToS E.Cisco IOS IP SLA can be used to verify if TCP or UDP ports on a target are active and responsive F.Cisco IOS IP SLA requires that NTP be configured on source and responder Right answers: CEF 2.Which path control feature sends simulated data across the network and measures performance between multiple network locations? A.policy-based routing (PBR) B.offset lists C.distribute lists D.route maps E.Cisco IOS IP SLA Right answers: E Note: If you want to get 100% latest and valid Cisco CCNP exam dumps, please contact SPOTO to buy now. 3.Which two Cisco IOS IP SLA statements are true when the target device is running the IP SLA responder component? (Choose two.) A.Time stamps enhance measurement accuracy. B.Message digest (MD5) authentication is used to secure the control protocol exchange. C.Network issues are proactively identified. D.TCP and UDP ports are actively monitored. Right answers: AB 4.Which IP SLA statement is true? A.Cisco IOS IP SLAs use passive traffic monitoring, generating traffic in a random manner to measure network performance. B.To increase security of IP SLAs control messages, Message Digest 5 (MD5) authentication can be used. C.An IP SLA responder could be a web server or an IP host. D.IP SLA operations are configured on a target device. Right answers: B Note: If you want to get 100% latest and valid Cisco CCNP exam dumps, please contact SPOTO to buy now. 5.Which two IP SLA path control statements are true? (Choose two.) A.The IOS IP SLA feature is only configurable using the command-line interface (CLI). B.The IOS IP SLA feature can only measure performance statistics between Cisco devices. C.An IP SLA operation is a measurement that includes protocol, frequency, traps, and thresholds. D.The IOS IP SLA feature can only measure performance statistics between a Cisco device and a host. E.The IOS IP SLA feature allows performance measurements between a Cisco device and another Cisco device or a host. F.IOS IP SLA is a mechanism for increasing inc*oming and outgoing metrics to routes that are learned via EIGRP. Right answers: CE 6.Refer to the exhibit. On the basis of the information presented, which statement is true? A.A default static route was configured with the track keyword. B.IP SLA operation 99 is currently monitoring the network 192.168.2.0/24. C.IP SLA operation 99 has lost connectivity to 172.16.12.2. D.EIGRP was configured to track the host at IP address 192.168.2.1. Right answers: A 7.When policy-based routing (PBR) is being implemented, which set command will override explicit entries in the routing table? A.set ip next-hop B.set default interface C.set ip precedence D.set ip default next-hop Right answers: A 8.Which three commands may be used to configure a route map? (Choose three.) A.match B.route-map C.metric D.ip prefix-list E.access-list F.set Right answers: ABF Note: If you want to get 100% latest and valid Cisco CCNP exam dumps, please contact SPOTO to buy now. 9.Refer to the exhibit. Based on the information that is presented, which statement is true? A.Packets that match access list 1 will be sent to the next-hop address 172.17.1.2. B.Access list 2 specifies that packets with a source address of 172.16.1.0 will be policy routed. C.Packets that match access list 2 will be denied access. D.Access list 1 specifies that packets with a destination address of 192.168.1.0 will be policy routed. E.Both match statements must be true for the ISP1 route map to be true. Right answers: B 10.Which packet switching method examines the first packet in each flow and the forwarding decision is cached in hardware for subsequent packets in the flows? A.Fast switching B.Process switching C.Store-and-forward switching D.Cut-through switching E.Cisco Express Forwarding (CEF) switching Right answers: A 11.Which packet switching method is the fastest and creates forwarding tables? A.Cisco Express Forwarding (CEF) switching B.Process switching C.Fast switching D.Store-and-forward switching E.Cut-through switching Right answers: A

Click Here: Free Sample: Cisco CCNP ROUTE Chapter 1 Exam Questions and Answers , Free Sample: Cisco CCNP ROUTE Chapter 2 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 3 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 4 Exam Questions and Answers and Free Sample: Cisco CCNP ROUTE Chapter 5 Exam Questions and Answers 1.You have created and IPv6 ACL called MY-LIST. Which command would you configure to use this ACL to check Inbound packets on an Interface? A.ipv6 access-class MY-LIST in B.Ipv6 traffic-filter MY-LIST in C.ipv6 access-list MY-LIST in D.ipv6 access-group MY-LIST in Right answers: B 2.Which protocol would you use to provide IPv4 Internet connectivity to IPv6 devices? Note: If you want to get 100% real and valid Cisco CCNP exam dumps, contact SPOTO to buy the latest one. A.NPTv6 B.PAT C.NAT64 D.NAT-PT Right answers: C 3.Which is a characteristic of dual-homed connectivity? A.Use of two ISPs B.No single points of failure C.Single point of failure due to ISP failure D.Single point of failure due to link failure Right answers: C 4.Which rules are implicit at the end of every IPv6 ACL? Right answers: B A.deny icmp any any nd-na deny icmp any any nd-ns permit ipv6 any any B.permit icmp any any nd-na permit icmp any any nd-ns deny ipv6 any any* C.deny icmp any any nd-na deny icmp any any nd-ns deny ipv6 any any D.permit icmp any any nd-na permit icmp any any nd-ns permit ipv6 any any 5.Which command would configure an R1 interface to obtain its IP address information using stateless DHCPv6? Note: If you want to get 100% real and valid Cisco CCNP exam dumps, contact SPOTO to buy the latest one. A.R1(config-if)# ipv6 address dhcpv6 B.R1(config-if)# ipv6 address dhcp C.R1(config-if)# ipv6 address autoconfig D.R1(config-if)# ipv6 address slaac Right answers: C 6.Which is the corresponding NAT term for the NVI term source local? A.Outside global address B.Inside global address C.Outside local address D.Inside local address Right answers: D 7.You are configuring your router to do NVI so that a PC can connect to the Internet. Which command do you configure on the interface connected to the PC? A.R1(config-if)# ip nat inside B.R1(config-if)# ip nat nvi C.R1(config-if)# ip nat enable D.R1(config-if)# ip nat outside Right answers: C 8.What does PAT use to distinguish between sessions that use the same address? A.Destination port number B.Type code C.Protocol number D.Source port number Right answers: D 9.Which command would configure an R1 Interface to obtain its IP address Information using stateful DHCPv6? A.R1(config-if)# ipv6 address dhcpv6 B.R1(config-if)# ipv6 address slaac C.R1(config-if)# ipv6 address autoconfig D.R1(config-if)# ipv6 address dhcp Right answers: D 10.Which command would configure an R1 interface to obtain its IP address Information using SLAAC? A.R1(config-if)# ipv6 address autoconfig B.R1(config-if)# ipv6 address dhcpv6 C.R1(config-if)# ipv6 address dhcp D.R1(config-if)# ipv6 address slaac Right answers: A Note: If you want to get 100% real and valid Cisco CCNP exam dumps, contact SPOTO to buy the latest one. 11.Assume a client requires DHCP services from a server on another network. Which option would correctly apply the ip helper-address interface configuration command? A.Use the following command on the interface connected to the server: R1(config-if)# ip helper-address client-address B.Use the following command on the interface connected to the client: R1(config-if)# ip helper-address client-address C.Use the following command on the interface connected to the server: R1(config-if)# ip helper-address server-address D.Use the following command on the interface connected to the client: R1(config-if)# ip helper-address server-address* E.Use the following command: R1(config)# ip helper-address server-address Right answers:D 12.The typee of network translation does a many-to-many translation. A. NAT overloading B. PAT C. Static NAT D. Dynamic NAT Right answers: D 13.A NAT enabled router is configured to translate the address of a PC (10.1.1.1) to the address 209.165.200.225. Which is the correct name for the 209.165.200.225 address? A.Inside global address B.Outside global address C.Inside local address D.Outside local address Right answers: A 14.Assume that R1 is a DHCP client and it is getting its IP address information an upstream router connected to interface Gigabit Ethernet 0/0. Which interface configuration command should be configured on G0/0? A.R1(config-if)# ip address dhcp B.R1(config-if)# ip client address C.R1(config-if)# ip dhcp address D.R1(config-if)# ip address client Right answers: D 15.Which type of Internet connectivity provides the most redundancy? A.Single-homed B.Multihomed C.Dual multihomed D.Dual-homed Right answers: C