The CCIE lab exam is considered to be an eight-hour, hands-on exam which would require the candidates to configure and troubleshoot a series of complex networks under given specifications. Knowledge of troubleshooting is also considered to be an important skill as well as candidates would be expected to diagnose and solve issues as part of the CCIE Routing and Switching lab exam. The candidates won’t be just configuring the end-user systems but would be also held responsible for all devices which would be residing in the network (hubs, etc.). Point values, as well as testing criteria, are provided. Before we discuss the Exam topics, we should also discuss the other related matters and also if you wish to clear this exam in a single attempt, check out the courses offered at the SPOTO Club.  Lab Environment The Cisco documentation is obtainable in the CCIE Routing and Switching lab room, but the exam would be assuming knowledge of the more common protocols and technologies. The documentation could be navigated using the index. No outside reference materials would be allowed in the lab room. You should report any suspected equipment issues to the proctor while the commencement of the exam; adjustments couldn’t be made once the exam is completed.  Lab Exam Grading The CCIE Routing and Switching labs would be graded by proctors who are going to ensure that all the criteria have been met. They would be utilizing automatic tools to gather data from the routers for performing preliminary evaluations. Candidates are required to reach a minimum threshold in all three sections as well as achieve an overall passing score too.  Lab Format The Troubleshooting module of CCIE Routing and Switching Lab Exam is 2 hours. If desired, candidates would be able to extend the Troubleshooting module's time by borrowing a maximum of 30 min from the Configuration module. Note, the total Configuration module time would be reduced if the extra time is spent in the Troubleshooting module. If the candidates can terminate the Troubleshooting module early, the unused Troubleshooting module’s time again would be added to the Configuration module’s time, ensuring a total CCIE Routing and Switching lab exam time of 8 hours. The Diagnostic module is considered to be fixed in duration, which is 30 minutes.  Results You can review your CCIE Routing and Switching Lab exam results online usually within 48 hours. Results are Pass/Fail and failing score reports would be indicating major topic areas where additional study, as well as preparation, might be useful.  Reevaluation of Lab Results A Reread involves having a second proctor load your configurations into a rack for re-creating the test as well as re-score the entire exam. Rereads would be available for the Routing and Switching, as well as Service Provider technology tracks. A Review involves having a second proctor for the verification of your answers and any applicable system-generated debug data which would be saved from your exam. Reviews would be available for all other tracks.  Payment Terms You should male your request within 14 days following your exam date by utilizing the "Request for Reread" link next to your lab record. A Reread would costs you around USD 1000.00 and a Review would be costing you about USD 400.00. Payment should be made online via credit card and Reread or Review would be initiated upon successful payment. You might not cancel the appeal request once the process is being initiated. Refunds would be only given when results change from fail to pass. CCIE Routing and Switching Lab Topics: 1.0 Layer 2 Technologies 20% 2.0 Layer 3 Technologies 40% 3.0 VPN Technologies 20% 4.0 Infrastructure Security 5% 5.0 Infrastructure Services 15% Now, that you have acquired the knowledge about the CCIE Routing and Switching Lab Exam Topics if you wish to clear your exam in a single attempt, you should enroll yourself in the courses offered at the SPOTO Club.

CCIE Routing and Switching exam will enable you to gain the expertise knowledge of configuring, validating and troubleshooting complex as well as the network infrastructure. It will help you to understand the inter-operation of the components of the infrastructure and even will help you to translate the functional requirements into a specific configuration of a device. Below we would be discussing some tips that you could follow to clear the CCIE Routing and Switching Lab and along with these tips, you should also opt for the courses offered by the SPOTO Club, for the CCIE R&S Lab Preparation, to ensure your success. After CCIE R&S Written Exam Usually, many people take a break after clearing the CCIE written exam. You could do the same, or you may start practicing for the Lab exam, which will be the next step for your CCIE certification. You may need a year or more, but it would be advisable to spend of at least a few months’ preparations, dedicated to only lab exams. You might have to sacrifice the early mornings, late nights, or both. It all will depend on the functioning of the brain. Speaking of which, you need to learn about understanding and working on your strengths. You need to find out that at what time your brain functions the best. It may be in the early morning and maybe at late nights, varying from person to person. Understanding the concept clearly It isn’t considered an ordinary exam, where you expect to learn the basic topic and then form your answers on your own. You will need an understanding of individual silos of networking, along with the features of protocols of routing as well as the security features. You will need to go through the WAN topologies as well and also you have to gain knowledge about interacting with the real environment. In short, you will have to grasp the impact of high-level on the whole network of the way you are going to implement a particular feature. There would be consequences for your actions, which you would require to understand as we know that there are numerous possible variations of configuring all the features. Experience in Routers and Switches An experience in configuration will come in handy if you want to pass this exam. If you can do this, it would be very beneficial for you as without this skill, you won’t be able to finish the lab exam in the allotted period of eight hours. Giving the lab exam will need lots of experience and the ability to perform at the same competency level each time. You will only succeed if you would be bear these things in mind and then practice the configuration. Skills related to exams Certain skills you need to develop in yourself in order to excel in this exam, like the time-management, solid understanding of exam environment and a fine-tuned analytical approach of giving this exam. In order to achieve success in this analysis, there are only two possible ways. Either you rectify your errors by finding it through repeated commencement of exam or you may choose another option, which is working through as many realistic and fully-featured lab scenarios, like you could find at the SPOTO Club’s Prep Courses, before going on with your first attempt. They are the best training provider when it comes to Cisco Certification. They have in total 16 years of experienced trainers and 100% passing guarantee, which boosts the confidence of the course taker and help them achieve their dream certification in a single attempt. So, do check out the study dumps of SPOTO Club.