Is it a right choice to get New Palo Alto Networks PCNSE Exam Dumps from SPOTO to pass the exam? The answer is definitely yes! It is always a dream for IT professionals to get the PCNSE certification since it is considered as the benchmark in the IT field and is never easy to pass in the 1st try. However, with SPOTO’s 100% real and valid practice tests, you can get fully prepared and ace the exam smoothly. Let’s get started to go through the demo below to test yourself! QUESTION 1 A customer wants to set up a VLAN interface for a Layer 2 Ethernet port. Which two mandatory options are used to configure a VLAN interface? (Choose two.) A. Virtual router B. Security zone C. ARP entries D. Netflow ProfileCorrect Answer: AB QUESTION 2An administrator has been asked to configure a Palo Alto Networks NGFW to provide protection against worms and trojans. Which Security Profile type will protect against worms and trojans? A. Anti-Spyware B. Instruction Prevention C. File Blocking D. Antivirus Correct Answer: D QUESTION 3 A company needs to preconfigure firewalls to be sent to remote sites with the least amount of pre-configuration. Once deployed, each firewall must establish secure tunnels back to multiple regional data centers to include the future regional data centers. Which VPN configuration would adapt to changes when deployed to the future site? A. Preconfigured GlobalProtect satellite B. Preconfigured GlobalProtect client C. Preconfigured IPsec tunnels D. Preconfigured PPTP Tunnels Correct Answer: A QUESTION 4 An administrator has been asked to configure active/passive HA for a pair of Palo Alto Networks NGFWs. The administrator assigns priority 100 to the active firewall. Which priority is correct for the passive firewall? A. 0 B. 99 C. 1 D. 255 Correct Answer: D QUESTION 5An administrator pushes a new configuration from Panorama to a pair of firewalls that are configured as an active/passive HA pair. Which NGFW receives the configuration from Panorama? A. The passive firewall, which then synchronizes to the active firewall B. The active firewall, which then synchronizes to the passive firewall C. Both the active and passive firewalls, which then synchronize with each other D. Both the active and passive firewalls independently, with no synchronization afterward Correct Answer: DQUESTION 6 When configuring a GlobalProtect Portal, what is the purpose of specifying an Authentication Profile? A. To enable Gateway authentication to the Portal B. To enable Portal authentication to the Gateway C. To enable user authentication to the Portal D. To enable client machine authentication to the Portal Correct Answer: CQUESTION 7If a template stack is assigned to a device and the stack includes three templates with overlapping settings, which settings are published to the device when the template stack is pushed? A. The settings assigned to the template that is on top of the stack. B. The administrator will be prompted to choose the settings for that chosen firewall. C. All the settings configured in all template D. Depending on the firewall location, Panorama decides with settings to send.Correct Answer: A QUESTION 8 Which method will dynamically register tags on the Palo Alto Networks NGFW? A. Restful API or the VMware API on the firewall or on the User-ID agent or the read-only domain controller (RODC) B. Restful API or the VMware API on the firewall or on the User-ID agent C. XML API or the VMware API on the firewall or on the User-ID agent or the CLI D. XML API or the VM Monitoring agent on the NGFW or on the User-ID agentCorrect Answer: D QUESTION 9How does an administrator schedule an Applications and Threats dynamic update while delaying the installation of the update for a certain amount of time? A. Configure the option for “Threshold.” B. Disable automatic updates during weekdays. C. Automatically “download only” and then install Applications and Threats later after the administrator approves the update. D. Automatically “download and install” but with the “disable new applications” option used. Correct Answer: A QUESTION 10 To connect the Palo Alto Networks firewall to AutoFocus, which setting must be enabled? A. Device>Setup>Services>AutoFocus B. Device>Setup>Management>AutoFocus C. AutoFocus is enabled by default on the Palo Alto Networks NGFW D. Device>Setup>WildFire>AutoFocus E. Device>Setup> Management> Logging and Reporting SettingsCorrect Answer: B
Download more demos for free? Click here !
Move Step in the IT Industry with SPOTO!
SPOTO is the leader in IT training for 17 years, which not only offers real and updated PCNSE exam questions and answers but also helped thousands of Palo Alto Networks professionals to pass the PCNSE exam. Join SPOTO for the most reliable and efficient PCNSE exam training!· SPOTO provides 100% real PCNSE exam practice tests to help you clear the PCNSE exam at the first try. · SPOTO will keep a close eye to update the PCNSE exam and ensure the materials are stable to pass during your service. · Our patient and professional tutors will offer 7/24 technical support to assist you in solving all the difficulties. Therefore, if you are ready to clear the PCNSE exam at the first try, then it is no doubt that using the real PCNSE exam study materials from SPOTO is the most efficient and trustworthy way to obtain the PCNSE certification!
Is it a right choice to get New Palo Alto Networks PCNSE Exam Dumps from SPOTO to pass the exam? The answer is definitely yes! It is always a dream for IT professionals to get the PCNSE certification since it is considered as the benchmark in the IT field and is never easy to pass in the 1st try. However, with SPOTO’s 100% real and valid practice tests, you can get fully prepared and ace the exam smoothly. Let’s get started to go through the demo below to test yourself!
QUESTION 1
A customer wants to set up a VLAN interface for a Layer 2 Ethernet port. Which two mandatory options are used to configure a VLAN interface? (Choose two.)
A. Virtual router
B. Security zone
C. ARP entries
D. Netflow Profile
Correct Answer: AB
QUESTION 2
An administrator has been asked to configure a Palo Alto Networks NGFW to provide protection against worms and trojans. Which Security Profile type will protect against worms and trojans?
A. Anti-Spyware
B. Instruction Prevention
C. File Blocking
D. Antivirus
Correct Answer: D
QUESTION 3
A company needs to preconfigure firewalls to be sent to remote sites with the least amount of pre-configuration. Once deployed, each firewall must establish secure tunnels back to multiple regional data centers to include the future regional data centers. Which VPN configuration would adapt to changes when deployed to the future site?
A. Preconfigured GlobalProtect satellite
B. Preconfigured GlobalProtect client
C. Preconfigured IPsec tunnels
D. Preconfigured PPTP Tunnels
Correct Answer: A
QUESTION 4
An administrator has been asked to configure active/passive HA for a pair of Palo Alto Networks NGFWs. The administrator assigns priority 100 to the active firewall. Which priority is correct for the passive firewall?
A. 0
B. 99
C. 1
D. 255
Correct Answer: D
QUESTION 5
An administrator pushes a new configuration from Panorama to a pair of firewalls that are configured as an active/passive HA pair. Which NGFW receives the configuration from Panorama?
A. The passive firewall, which then synchronizes to the active firewall
B. The active firewall, which then synchronizes to the passive firewall
C. Both the active and passive firewalls, which then synchronize with each other
D. Both the active and passive firewalls independently, with no synchronization afterward
Correct Answer: D
QUESTION 6
When configuring a GlobalProtect Portal, what is the purpose of specifying an Authentication Profile?
A. To enable Gateway authentication to the Portal
B. To enable Portal authentication to the Gateway
C. To enable user authentication to the Portal
D. To enable client machine authentication to the Portal
Correct Answer: C
QUESTION 7
If a template stack is assigned to a device and the stack includes three templates with overlapping settings, which settings are published to the device when the template stack is pushed?
A. The settings assigned to the template that is on top of the stack.
B. The administrator will be prompted to choose the settings for that chosen firewall.
C. All the settings configured in all template
D. Depending on the firewall location, Panorama decides with settings to send.
Correct Answer: A
QUESTION 8
Which method will dynamically register tags on the Palo Alto Networks NGFW?
A. Restful API or the VMware API on the firewall or on the User-ID agent or the read-only domain controller
(RODC)
B. Restful API or the VMware API on the firewall or on the User-ID agent
C. XML API or the VMware API on the firewall or on the User-ID agent or the CLI
D. XML API or the VM Monitoring agent on the NGFW or on the User-ID agent
Correct Answer: D
QUESTION 9
How does an administrator schedule an Applications and Threats dynamic update while delaying the installation of the update for a certain amount of time?
A. Configure the option for “Threshold.”
B. Disable automatic updates during weekdays.
C. Automatically “download only” and then install Applications and Threats later after the administrator approves the update.
D. Automatically “download and install” but with the “disable new applications” option used.
Correct Answer: A
QUESTION 10
To connect the Palo Alto Networks firewall to AutoFocus, which setting must be enabled?
A. Device>Setup>Services>AutoFocus
B. Device>Setup>Management>AutoFocus
C. AutoFocus is enabled by default on the Palo Alto Networks NGFW
D. Device>Setup>WildFire>AutoFocus
E. Device>Setup> Management> Logging and Reporting Settings
Correct Answer: B
